Litepanels Astra 1×1 Kit

Litepanels continues to expand and enhance its formidable LED line with the introduction of the Astra 1×1 Bi-Color LED Panel that offers 4x the brightness as the original Bi-Color 1×1. As in previous versions of the 1×1 form factor, the Astra 1×1 variable tungsten to daylight color temperature with negligible color shift, 0-100% dimming, and a universal (100-240 VAC) adapter. You can also run it on 13-24 VDC batteries with the Gold Mount battery plate (included).

We also carry the Snapbag Softbox for the Astra along with the 40° Snapgrid Eggcrate.

The technological advancement and enhancement is evident in the high CRI and significantly increased brightness due to the use of tightly-binned LEDs and fine-tuned TIR (Total Internal Reflection) optics, resulting in a longer throw over a wider field. Another addition is the Astra Bi-Color’s Dual Cooling. Choose the fan/convection mode or run silently with the field-replaceable fan off. You can control Astra’s functions locally or remotely with a separate purchase of a DMX module. The Astra 1×1 Bi-Color comes with both US and EU power cables and a removable 5/8″ TVMP connecter for hanging or stand mounting. Two 1/4″-20 female taps offer alternate mounting points.

Output is up to 4x Brighter than Original Bi-Color 1×1
High-performance LEDs with custom-paired optics
Higher intensity equals a longer throw with a wider effective beam spread

Superior Color Reproduction
High color rendition (CRI)

Efficient Thermal Management
Completely silent passive cooling mode
Ultra-quiet active cooling mode with double light output

Smooth Dimming from 0-100%
No noticeable color shift throughout the entire range
Flicker-free at any frame rate or shutter angle

Flexible, Modular Concept
The optional communications module allows the brightness, color temperature, and cooling mode to be controlled via DMX512 protocol (additional module options under development)
Yoke mounted Gold Mount or V-Mount battery plates
External power supply
Field-replaceable fan module

Modern Fixture Design
Easily identifiable and ergonomic manual controls for dimming, color, and power status
Aluminum I-beam core construction to provide maximum durability and superior thermal management
Aluminum accessory mounting points and lens/filter rails
End cap exhaust vents angle downward to direct air flow away from the fixture and help prevent foreign material from entering
Durable, industry standard 3-pin XLR locking power connector

Custom Curved Yoke Design
Wide, unobstructed tilt range
Yoke-mounted power supply and optional battery plates with dual integrated cable guides
Removable TVMP connector for flexible mounting options
Two alternate 1/4″-20 mounting points

Technical Specs

  • Material: Aluminum
  • Light Source: LED
  • Color Range: Approximately 3,200-5,600 K
  • Beam Angle Beam angle: 46°
  • Photometrics
  • Daylight:
    • 425 fc / 4577 lux @ 5′ / 1.5 m
    • 106 fc / 1144 lux @ 10′ / 3 m
    • 47 fc / 509 lux @ 15′ / 4.6 m
  • Tungsten:
    • 349 fc / 3758 lux @ 5′ / 1.5 m
    • 87 fc / 940 lux @ 10′ / 3 m
    • 39 fc / 418 lux @ 15′ / 4.6 m
  • Dimming: 0-100%
  • Operating Voltage:
    • 100-240 VAC 50/60 Hz with included AC adapter
    • 13-24 VDC with optional battery
  • Power Draw: 110 W
  • DMX: Yes, with optional adapter
  • Power Connector: 3-Pin XLR
  • Mount: 5/8″ (16 mm) Receiver (750 / Baby)
  • Dimensions: 17.7 x 16.3 x 5.3″ (45 x 41.4 x 13.4 cm)
  • Weight: 7.0 lb (3.2 kg)

Our Kit Includes:

  • Litepanels Astra 1×1 Bi-Color Fixture with Mounting Yoke
  • Litepanels Astra 1×1 Nanoptic Lens Kit
  • Litepanels Astra 1×1 AC Adapter with Cable
  • Litepanels Astra 1×1 Anton Bauer Battery Bracket
  • Litepanels Astra 1×1 P-Tap to 3-Pin XLR Cable
  • Pelican Case