Browse Other in our Grip & Electric department at Hand Held Films, a New York motion picture equipment rental house.

Other NYC Grip and Electric Equipment Rental

Other

2-Way Adjustable Sawhorse

2×4 Lumber Wall Spreader

2×6 Lumber Wall Spreader

3/4″ Combination Wrench

5/8″ to 3/8″ Modern Pin (Norm Pin)

Chain Vice Grip

Flat Gel Frame Holder

Fluorescent Lamp Dual Holder w/ 750 / Baby Pin (2 Tube Bulb Holder)

Fluorescent Lamp Holder w/ 750 / Baby Pin (Single Tube Bulb Holder)

Gel Frame Ear Extension (Set of 3)

JakerPlat 4-Bank Fluorescent Lamp Holder w/ Kino Mount Plate (MyWay Plate equivalent)

Ladder Bracket – Adjustable

MacGyver Clamp (3-1/2″ – 8″ I-Beam to Grid Clamp)

MacGyver Clamp (5″-14″ I-Beam to Grid Clamp)

Matthews Crowder Hanger (No Nail Hanger)

Matthews Heavy Duty Telescoping Hanger w/ Stirrup (3′-6′, 4′-8′, 5′-10′)

 gives you all the same moves and features as a 2 1/2″ grip head but in a more compact (1.25″/32mm diameter) package. With a wide variety of dedicated weighted bases for increased stability, clips to hold props and objects, and micro shot bags plus a wide variety of micro scrims and flags (available separately), the MICRO grip head is particularly suited to tabletop, products, and miniature work.

Matthews MICROgrip Head

Ideal for tabletop and product photography, this 

MICROgrip 1/4″-20 Male to 1/4″-20 Female Rod

 is part of a broad range of products that have been developed around the MICROgrip head which provides all features of its 2-1/2″ counterpart in a smaller form factor.

Matthews MICROgrip Rod

 has become one of the most popular grip accessories of all time. The 5/8″ pin attached to the ball joint pivots from -15° to +90° while the collar rotates 360°. All axis lock positively with one locking handle. The stand mounting portion has an outside diameter of 5/8″ to fit into a Junior Receiver, while the inside is bored to mount on a 5/8″ pin. The Matthews Magic Finger is machined from one solid piece of steel which allows for the strongest, safest product of this type available. Knockoffs of the Matthews Magic Finger are made from two pieces of steel that are bolted together and do not offer the unitized characteristics of the Matthews product.

Matthews Magic Finger

Matthews

The unique “expanding casting” black spring-loaded Matthpole provides pressure for holding the Matthpole in place between door jambs, or in window frames. Clamp various lighting, background, or grip equipment to it with full confidence.

Matthews Matthpoles are stronger and more durable than any similar product. Unique “expanding casting” provides the pressure for holding the Matthpole in place. Used primarily in studios for mounting seamless paper and backdrops with the use of Super Mafer Clamps and Swivel U-Hooks; the Matthpole has also been used in a horizontal position behind the President of the United States to support small lighting fixtures, in campaign venues for many candidates, and probably in many places we don’t even know about. Manufactured in three overlapping sizes, Matthpoles can be used in openings as small as 30″ to 178″ which is almost 15 feet without the need for extensions.

Matthews Matthpole PoleCats

 functions as a grabber for a flag or a small arm. It can also be used to mount a small light fixture to an existing arm. Made of cast aluminum alloy with a chrome-plated steel post for extra strength and minimum weight, the Mini Matthellini is perfect for tabletop photography, car interiors, and other confined spaces.

Other

All Other Rentals

2-WAY ADJUSTABLE SAWHORSE

2×4 LUMBER WALL SPREADER

2×6 LUMBER WALL SPREADER

3/4″ COMBINATION WRENCH

5/8″ TO 3/8″ MODERN PIN (NORM PIN)

CHAIN VICE GRIP

FLAT GEL FRAME HOLDER

FLUORESCENT LAMP DUAL HOLDER W/ 750 / BABY PIN (2 TUBE BULB HOLDER)

FLUORESCENT LAMP HOLDER W/ 750 / BABY PIN (SINGLE TUBE BULB HOLDER)

GEL FRAME EAR EXTENSION (SET OF 3)

JAKERPLAT 4-BANK FLUORESCENT LAMP HOLDER W/ KINO MOUNT PLATE (MYWAY PLATE EQUIVALENT)

LADDER BRACKET – ADJUSTABLE

MACGYVER CLAMP (3-1/2″ – 8″ I-BEAM TO GRID CLAMP)

MACGYVER CLAMP (5″-14″ I-BEAM TO GRID CLAMP)

MATTHEWS CROWDER HANGER (NO NAIL HANGER)

Location

Hours of Operation