Aputure Light Storm Softboxes

Aputure Lens Attachements

Aputure Nova P600c Softboxes

Aputure

Barndoors, Grid, and Gel Holder for LS 120d II and LS 300d II LED Lights

 are light modifiers that fit the reflector that comes with all versions of these 

 LED lights. The 4-way barndoor design allows for one to four of the leaves to be swung into the light's beam to illuminate areas that you want while keeping light from areas where you don't want it. The 30° grid narrows the beam spread. The barndoors also include a reflector, as well as a magnetic gel holder that allows filmmakers to easily add color to their lights' output.

Aputure Barndoor w/ 30-Degree Honeycomb Grid & Gel Holder

Aputure Barndoor Black Reflector-mounted Dish

Browse Aputure Accessories in our Grip & Electric department at Hand Held Films, a New York motion picture equipment rental house.

Aputure Accessories NYC Grip and Electric Equipment Rental

Aputure Accessories

Aputure Barndoor Kit 

F10 Barndoors for the LS 600d Fresnel Attachment

 offer a means to control the 15 to 45° beam spread range of the Fresnel. Simply swing one or more leaves into the beam path to light areas you want and to keep light from areas you don't want illuminated. The 8-leaf design gives even greater control than 4-leaf versions and provides clean cuts of light.

Aputure F10 Bowens Mount Black Dish Reflector

Aputure F10 Bowens Mount Barndoor Kit

F10 Fresnel Attachment for LS 600d LED & LS 1200d Pro Lights

 allows smooth focusing of the light's beam spread from a tight 15° to a 45° medium flood. The Fresnel's design has built-in ventilation to prevent overheating while thwarting spill light.

Aputure F10 Bowens Mount Fresnel Carry Bag

Aputure F10 Bowens Mount Fresnel Kit

 is a softbox measuring 14 x 14". It is compatible with the LS 60d and 60x LED lights. It can be used as a key light or back light and can be tucked into corners and locations where larger softboxes are not able to fit. A useful solution for corporate and broadcast work, the softbox creates a soft and flattering light with open shadows. The softbox comes with 1.5- and 2.5-stop diffusers, plus a 45° fabric grid.

Aputure LS 60 SoftBox Kit

Made for use with LED or strobe fixtures, the 

 casts a near 360° soft light that spreads evenly over a large area. You can mount it horizontally or hang it overhead on a boom to raise the ambient light level, open up shadows, and let more focused fixtures work their magic.

To add versatility to the lantern, Aputure includes a skirt to control the light. Using the skirt on all four sides limits the beam to a pool of soft light, while covering one side directs the light or creates a light-to-dark ratio to add dimension. The Lantern 90 has a Bowens speed ring for Aputure lights, but it can also be used on lights made by the many other manufacturers that employ this popular mount.

Aputure Lantern 90 (3') Kit

 is a softbox measuring 12 x 48" that mounts onto any light with a Bowens mount. It features a narrow, rectangular design so it can be used as a soft edge light or for reflections, and it can be tucked into corners and locations where larger softboxes are not able to fit. It can be a solution for corporate and broadcast work to create a soft and flattering light with open shadows.

Aputure Light Box 6090 Bowens Mount Adapter

Aputure Light Box 30120 (12 x 48")

Aputure Light Box 6090 (24 x 36") ( Soft Box )

Aputure Light Dome 150 Kit

 is a significant upgrade from the original Light Dome, featuring even higher quality diffusion fabric, and a rapid build and breakdown system. Now includes two options (1.5 stops & 2.5 stops) for ultra-soft front diffusion fabric. These materials create a beautiful soft light that provides a very even wrap around your subject.

Aputure Light Dome Speedring with Gel Holder

Aputure Light Dome II Kit (35")

Armed with an upgraded dual-sided and foldable quick release mechanism, the 

 accelerates the set-up time for its 16-sided, point source-softening circular softbox, bringing professional, portrait-ready light to any shoot in mere seconds. The parabolic, hexadecanol structure of the Light Dome III is fortified by 16 durable steel support rods, which now snap into place with the downward press of its widely-compatible Bowens Mount bracket, saving valuable time on set. Its shape also promotes uniform light output distribution for soft, even light on any subject. The modifier features a silver interior to maximize the light source's output and comes with 1.5-stop and 2.5-stop front diffusers and a 40° fabric grid for further light-shaping capabilities.

Aputure Light Dome III Kit (35.1")

Designed for lightweight and portability, the 21.6″ 

 is compatible with the Aputure Light Storm 120 and 300 Series LED lights and any LED light with a Bowens front accessory mount. 

The sturdily built modifier has 16 wear-resistant Hadfield steel rods that form a circular field of light that yields wide coverage and pleasing, natural-looking catchlights in the eyes of your subject while maximizing output with its reflective silver interior. To provide further control, Aputure includes a 40° fabric grid, which eliminates spill light but, most importantly, gives you directional control of the soft source for selective lighting or dramatic effects. A filter holder is included as well for creative color.

Aputure Light Dome Mini II Outside Diffuser

Aputure Light Dome Mini II Speedring with Gel Holder

Aputure Light Dome Mini II Inner Reflector

Aputure Light Dome Mini II Kit (21.6″)

Armed with an upgraded dual-sided and foldable quick release mechanism, the 22.8" 

 accelerates the set-up time for its 16-sided, point source-softening circular softbox, bringing professional, portrait-ready light to any shoot in mere seconds. Optimized for lightweight portability, the parabolic, hexadecanol structure of the Light Dome Mini III is fortified by 16 durable steel support rods, which now snap into place with the downward press of its widely-compatible Bowens Mount bracket, saving valuable time on set. Its shape also promotes uniform light output distribution for soft, even light on any subject. The modifier features a silver interior to maximize the light output and comes with a front diffusion cloth, a gold/silver inner baffle, and a 40° fabric grid for further light-shaping capabilities.

Aputure Light Dome Mini III Light Grid Cloth

Aputure Light Dome Mini III Carrying Case

Aputure Light Dome Mini III Kit (21.5")

 is a 16-sided modifier with a 33.5" diameter. It has a soft wraparound quality that is a hallmark of this shape, especially when used close to the subject. It also has a few surprises that offer you several contrast options. The 1.5- and 2.5-stop front diffusion fabrics offer ways to manipulate the light. Also a removable 1.5-stop internal baffle softens the initial point source of light and allows it to fill the entire softbox more evenly. The 45° fabric grid provides directional control to enable selective lighting. The Light Dome SE has a Bowens-type speed ring compatible with lights such as the Amaran 100d, 100x, 200d, & 200x, Aputure LS 600d Pro, 300d II, 300x, and the 120d II, as well as many other lights that use this popular mount.

Aputure Light Dome SE (35.5") Light Diffusion

Aputure Light Dome SE (35.5") Heavy Diffusion

Aputure Light Dome SE (35.5") 45° Egg Crate

Aputure Light Dome SE (35.5") Inner Baffle

Aputure Light Dome SE (35.5") Carrying Bag

Aputure Light Dome SE (35.5") Kit

Aputure Light Dome SE Kit

Ideal for use overhead or to raise the ambient illumination level, this 

 has a 2.2' diameter and the same omni-directional quality of light as the China Balls of yore but built of durable materials. It has a skirt set to control the 270° beam spread and a Bowens mount that fits Aputure lights such as the 120d or 300d series, but is compatible with the many other lights that use this popular mount.

Aputure Light Storm Lantern Kit (26")

 is an electronic light modifier with a large 14" diameter lens and a motorized 18 to 45° spot-flood adjustable beam angle range. The F14 incorporates an Aputure Mount that communicates with the Electro Storm light instruments to relay calibration data that the mounted fixtures can use to optimize the accuracy of their light engine output. The included detachable yoke provides better balance when mounting the fixture on a stand. It also has a safety chain for added rigging security. The barndoors provide finer control over beam spread, making it possible to flag areas for more control.

Designed for the Electro Storm CS15 and Electro Storm XT26 high-output point-source fixtures, the F14 Fresnel optimizes and amplifies the light output, providing smooth, remote adjustability and a beautiful light quality only achievable with large Fresnels.

Aputure Motorized F14 Fresnel Lens Housing

Aputure Motorized F14 Fresnel Removable Yoke

Aputure Motorized F14 Fresnel Kit

 is a battery-powered single-universe transmitter and receiver for CRMX, DMX512, RDM, Art-Net, and sACN protocols, designed to expand the breadth and scope of Aputure's DMX console, the Sidus Link Pro app. Its three antennas boost its transmitting and receiving power, which lasts up to 18 hours on a single USB-C charge. The CRMX wireless range extends to 985', while the Wi-Fi operates on the 5.8 GHz frequency to avoid interference and communicate data faster. The Sidus One also converts CRMX wireless data into a wired DMX512 signal for non-CRMX units. When using Sidus Link Pro, users can access up to four universes with four Sidus One transceivers. Sidus One units also enhance the range and stability of the Sidus Mesh network when controlling Aputure lights. The unit's durable, IP54-rated construction makes it available for use in any filmmaking environment.

Aputure Sidus One Wireless DMX Transceiver

Aputure Sidus One USB Type C to A Adapter

Aputure Sidus One 5.8 Ghz Wi-fi Antenna (Red)

Aputure Sidus One 2.4 Ghz CRMX/BT Antenna (White)

Aputure Sidus One Wireless DMX Transceiver Kit

Designed for use with the projection attachment of the Light Storm LC 120d II, 120D, and 300D, the 

 allows lights outfitted with the Spotlight Mount to project B-size (3.4") patterns or images from the 10-gobo set or any other B-sized gobos. Gobos take full advantage of the Spotlight Mount's ability to precisely shape LED light into powerful and highly controllable beams, perfect for quickly adding texture to a scene.

Aputure Spotlight 10-Piece Gobo Kit

 allows lights outfitted with the Spotlight Max to project unique patterns onto backgrounds or walls. Included are a variety of ten A-size, 3.9" gobos with classic designs such as modern window, fire, scatter, church window, grille, ripple, lightning, linear, fireworks, and dot.

Aputure Spotlight Max 10-Piece Gobo Kit Case

Aputure Spotlight Max 10-Piece Gobo Kit

 introduces its most powerful projection lens, the 

. This optical modifier instantly transforms Bowens mount LED lights with 600 to 2600W of power output into a perfectly circular spotlight. Optimized to work with the brand's LS 600 Series, LS 1200d Pro, and the Electro Storm CS15 and XT26 fixtures, this is the spotlight filmmakers and lighting technicians have been waiting for.

The result of the Spotlight Max's stellar optical projection performance is a tight and intense beam of light with a further reach and even, shapeable output. With internal cutters, you can easily shape the beam for sharp cuts and precise control. This kit includes a 36° lens, a rotatable gobo clip, and three A-sized gobos for unique light projection shapes. A robust, rolling hard case packs it all for storage, protection, and transportation.

Aputure Spotlight Max LED 3-Piece Gobo Pattern Set

Aputure Spotlight Max LED Rotatable Gobo Clip

Aputure 18-Leaf Iris for Spotlight Max Mount

Aputure Spotlight Max LED Lens Carrying Bag

Aputure Spotlight Max LED Kit

Aputure Spotlight Mount Set with 19°, 26° & 36° Lenses

 is a versatile light modifier for producing dramatic yet clean beams of light with a high degree of control. Featuring a Bowens mount, this modifier can be easily attached to a variety of lights, including the Light Storm LC 120d II, 120D, 300D, and 600D series lights, and its integrated yoke has a dual junior/baby mount for attaching to anything from a C-stand to a lighting grid.

Aputure Spotlight Mount w/ Dual Baby & Junior Mount

Aputure Spotlight Mount Gobo Pattern Set (3)

Aputure Spotlight 19° Lens Tube (Barrel) w/ Gel Frame

Aputure Spotlight 26° Lens Tube (Barrel) w/ Gel Frame

Aputure Spotlight 36° Lens Tube (Barrel) w/ Gel Frame

Aputure Spotlight Mount Kit with Lenses (for use with C120d & C300d)

 attaches directly to the fixture without the need of a speed ring or bracket. It includes full and half Chimera cloth screens and comes in a compact messenger sack.

Chimera POP Bank for Aputure Nova P600c Body

Chimera POP Bank for Aputure Nova P600c Full Diffusion

Chimera POP Bank for Aputure Nova P600c Half Diffusion

Chimera POP Bank for Aputure Nova P600c Baffle Cloth

Chimera POP Bank for Aputure Nova P600c Carrying Case

Chimera POP Bank for Aputure Nova P600c

 Light Storm C120d, LS C120d II, and LS C300d, the 

 offers a beam spread that’s variable from 12° to 40°. A valuable bi-product of this enhanced design is its ability to intensify the output of the light! Aputure’s LS 120d II, for example, is capable of outputting up to 14x its standard power thanks to Fresnel’s dual-lens design.

The enhanced design features dual optical elements, a larger 6″ front Fresnel lens, improved ventilation, and minimized light leaks. The rear lens focuses and magnifies the beam onto the larger 6″ front Fresnel lens, performing with zero wasted light. The dual lens optical design makes the Fresnel 2X twice as powerful as the original Aputure Fresnel and makes the LS C120d II up to 14 times brighter.

The Fresnel 2X comes with a padded case for storage and transport.

Browse Aputure Lens Attachements in our Grip & Electric department at Hand Held Films, a New York motion picture equipment rental house.

Aputure Lens Attachements NYC Grip and Electric Equipment Rental

Aputure Fresnel 2X Attachment Kit

F10 Bowens Mount Barndoor Kit

F10 Bowens Mount Fresnel Attachment Kit

Spotlight Mount Kit w/ Lenses

26″ diameter Lantern Softbox from Aputure

 has the same omnidirectional quality of light as the “China Balls” of yore but is built of durable materials and has accessories such as a skirt set to control the 270-degree beam spread. The Lantern has a Bowens mount that fits Aputure lights such as the 120d or 300d series, but it is also compatible with many other lights that use this popular mount.

Browse Aputure Light Storm Softboxes in our Grip & Electric department at Hand Held Films, a New York motion picture equipment rental house.

Aputure Light Storm Softboxes NYC Grip and Electric Equipment Rental

Aputure Lantern Kit (26")

Lantern 90 Kit (3′)

Light Storm 60 Softbox Kit

Browse Aputure Nova P600c Softboxes in our Grip & Electric department at Hand Held Films, a New York motion picture equipment rental house.

Aputure Accessories

Aputure Accessories Categories

All Aputure Accessories Rentals

APUTURE BARNDOOR KIT

APUTURE F10 BOWENS MOUNT BARNDOOR KIT

APUTURE F10 BOWENS MOUNT FRESNEL KIT

APUTURE LS 60 SOFTBOX KIT

APUTURE LANTERN 90 (3') KIT

APUTURE LIGHT BOX 30120 (12 X 48")

APUTURE LIGHT BOX 6090 (24 X 36") ( SOFT BOX )

APUTURE LIGHT DOME 150 KIT

APUTURE LIGHT DOME II KIT (35")

APUTURE LIGHT DOME III KIT (35.1")

APUTURE LIGHT DOME MINI II KIT (21.6″)

APUTURE LIGHT DOME MINI III KIT (21.5")

APUTURE LIGHT DOME SE (35.5") KIT

APUTURE LIGHT DOME SE KIT

APUTURE LIGHT STORM LANTERN KIT (26")

Location

Hours of Operation