J.L. Fisher

, used on J.L. Fisher Dolly Models 11, 10, and 9, supports jib arms, lightweight camera booms, and counterbalanced camera cranes. The Center Mount has thumbscrews for four-way leveling adjustment and a leveling indicator. Easily installed, the Center Mount has a standard Mitchell mount and a maximum gross load capacity of 900 pounds (409kg). Center Mount is not for supporting personnel or personnel carrying cranes.

The maximum gross load capacity is 900 pounds (409 kg).

2 x Fisher Center Mount Adjusting Fisher 11 Support

2 x Fisher Center Mount Level Fisher 11 Support

2 x Fisher Center Mount Adjusting Fisher 10 Support

2 x Fisher Center Mount Level Fisher 10 Support

4 x Fisher Center Mount Socket Head Screw 3/8-16 x 1 1/4”

2 x Fisher Center Mount Socket Head Screw 3/8-16 x 2”

Browse Jibs in our Grip & Electric department at Hand Held Films, a New York motion picture equipment rental house.

Jibs NYC Grip and Electric Equipment Rental

Jibs

J. L. Fisher Center Mount

is perfect for any scale production requiring a medium jib shot combined with a dolly move and is compatible with both Fisher 10 and 11 dollies. When using a Fisher 11 the 

 is required. The Center Mount is only required (although it is recommended) on the Model 10 Dolly when the overall payload 

Boasting an overall reach of 5′ 10.5″ and a maximum payload of 164 lbs (including counterweights), the model 21 jib is the most robust jib in our inventory. When mounted directly onto the Fisher 10 boom arm this jib has a maximum height of 9′ 6″, making it ideal for most “top-down” shots. While the low-mode attachment will allow you to creep inches above the floor.

Max. height on 10 Dolly with Center Mount:

Min. height on 10 Dolly with Center Mount:

Fisher 21 Accessories: Platewasher, Bolt, Handscrew, and Large Allen Wrench

J. L. Fisher Jib 21

Long Valley Seven Jib 100mm Kit

Long Valley Seven Jib 150mm Kit

Losmandy

Standard Porta-Jib with 100mm Camera Bowl

 is a two-stage, round-tube jib arm supporting camera rigs weighing up to 100 lb. This versatile jib includes a 100mm bowl camera insert; it may also be used to support larger rigs on 150mm fluid heads using separately available Mitchell or 150mm bowl front inserts. This two-stage, telescoping jib arm has a reach of 57", a pull-back of 19", and a boom range of 72". Features include a Vector Balancing Bar, 7 lb fine-tuning weight, a boom lock, and pan lock. The Vector Balancing System enables you to transfer weight from the horizontal bar to the vertical Vector Bar, creating a zero-drift effect.

Telescoping aluminum and stainless steel tubes

 Fine-Tuning Weight: 7 lbs (3.2 kg) Vector Balancing Bar Barbell weights 

60lbs (27.22kg), 100mm front insert: 1lbs (450g)

Losmandy Porta-Jib Standard Kit (w/ Weights)

 is a lightweight, compact jib arm supporting camera rigs weighing up to 40 lb. This two-stage jib incorporates a 100mm bowl camera insert and is small enough to transport in a baby tripod case (case not included). This two-stage, telescoping jib arm has a reach of 38–55″, a pull-back of 11–18″, a 31″ folded height, and a boom range of 41–68″. Features include a Vector Balancing Bar, boom lock, and pan lock. The Vector Balancing System enables you to transfer weight from the horizontal bar to the vertical Vector Bar, creating a zero-drift effect.

Porta-Jib Traveller Lock Down 3/8 Rod w/ knob

Porta-Jib Traveller Vector Bar w/ 2 Lockdowns

Porta-Jib Traveller weight bar male w/ Lockdown

Porta-Jib Traveller weight bar female w/ Lockdown

Porta-Jib Traveller Long Locking Pin w/ t-handle

Sachtler to Mitchell Adapter 100mm Ball w/ Washer

Jibs

All Jibs Rentals

J. L. FISHER CENTER MOUNT

J. L. FISHER JIB 21

LONG VALLEY SEVEN JIB 100MM KIT

LONG VALLEY SEVEN JIB 150MM KIT

LOSMANDY PORTA-JIB STANDARD KIT (W/ WEIGHTS)

LOSMANDY PORTA-JIB TRAVELLER

Location

Hours of Operation