Litepanels Astra 1×1 Kit

Litepanels continues to expand and enhance its formidable LED line with the introduction of the Astra 1×1 Bi-Color LED Panel that offers 4x the brightness as the original Bi-Color 1×1. As in previous versions of the 1×1 form factor, the Astra 1×1 variable tungsten to daylight color temperature with negligible color shift, 0-100% dimming, and a universal (100-240 VAC) adapter. You can also run it on 13-24 VDC batteries with the Gold Mount battery plate (included).

We also carry the Snapbag Softbox for the Astra along with the 40° Snapgrid Eggcrate.

The technological advancement and enhancement is evident in the high CRI and significantly increased brightness due to the use of tightly-binned LEDs and fine-tuned TIR (Total Internal Reflection) optics, resulting in a longer throw over a wider field. Another addition is the Astra Bi-Color’s Dual Cooling. Choose the fan/convection mode or run silently with the field-replaceable fan off. You can control Astra’s functions locally or remotely with a separate purchase of a DMX module. The Astra 1×1 Bi-Color comes with both US and EU power cables and a removable 5/8″ TVMP connecter for hanging or stand mounting. Two 1/4″-20 female taps offer alternate mounting points.

Astra Highlights:

Output is up to 4x Brighter than Original Bi-Color 1×1

• High-performance LEDs with custom-paired optics
• Higher intensity equals a longer throw with a wider effective beam spread

Superior Color Reproduction

• High color rendition (CRI)

Efficient Thermal Management

• Completely silent passive cooling mode
• Ultra-quiet active cooling mode with double light output

Smooth Dimming from 0-100%

• No noticeable color shift throughout the entire range
• Flicker-free at any frame rate or shutter angle

Flexible, Modular Concept

• The optional communications module allows the brightness, color temperature, and cooling mode to be controlled via DMX512 protocol (additional module options under development)
• Yoke mounted Gold Mount or V-Mount battery plates
• External power supply
• Field-replaceable fan module

Modern Fixture Design

• Easily identifiable and ergonomic manual controls for dimming, color, and power status
• Aluminum I-beam core construction to provide maximum durability and superior thermal management
• Aluminum accessory mounting points and lens/filter rails
• End cap exhaust vents angle downward to direct air flow away from the fixture and help prevent foreign material from entering
• Durable, industry standard 3-pin XLR locking power connector

Custom Curved Yoke Design

• Wide, unobstructed tilt range
• Yoke-mounted power supply and optional battery plates with dual integrated cable guides
• Removable TVMP connector for flexible mounting options
• Two alternate 1/4″-20 mounting points

Technical Specs:

Material: Aluminum
Light Source: LED
Color Range: Approximately 3,200 – 5,600 K
Beam Angle Beam Angle: 46°

Photometrics:

• Daylight
  425 fc / 4577 lux @ 5′ / 1.5 m
  106 fc / 1144 lux @ 10′ / 3 m
  47 fc / 509 lux @ 15′ / 4.6 m
• Tungsten
  349 fc / 3758 lux @ 5′ / 1.5 m
  87 fc / 940 lux @ 10′ / 3 m
  39 fc / 418 lux @ 15′ / 4.6 m

Operating Voltage: 100-240 VAC 50/60 Hz with included AC adapter, 13-24 VDC with optional battery
Power Draw: 110 W
Dimming: 0-100%
DMX: Yes, with optional adapter
Power Connector: 3-Pin XLR
Mount: 5/8″ (16 mm) Receiver (750 / Baby)
Dimensions: 17.7 x 16.3 x 5.3″ (45 x 41.4 x 13.4 cm)
Weight: 7.0 lb (3.2 kg)

Kit Info:

• Litepanels Astra 1×1 Bi-Color Fixture with Mounting Yoke
• Litepanels Astra 1×1 Nanoptic Lens Kit
• Litepanels Astra 1×1 AC Adapter with Cable
• Litepanels Astra 1×1 Anton Bauer Battery Bracket
• Litepanels Astra 1×1 P-Tap to 3-Pin XLR Cable
• Pelican Case