Sound Devices PIX 240i

Screen Resolution

• 800 x 480

SDI Input & Output

• 4:4:4 or 4:2:2; 12, 10, or 8-bit
• Input: 3G-SDI (levels A and B), HD-SDI, or SDI
• Output: 3G-SDI (level A), HD-SDI, or SDI
• SMPTE 12M-1, 12M-2, 125M, 259M, 272M, 291M, 292, 296M, 299, 352M, 372, 424, 425

HDMI Input & Output

• Input: v1.4a, 4:4:4 or 4:2:2, RGB or YCbCr, 10 or 8-bit, HDCP-enabled
• Output: v1.3, 4:2:2 8-bit, RGB and YCbCr

Video Input Resolutions / Rates

• 1080p23.976/24/25/29.97/30
• 1080i50/59.94/60
• 1080PsF23.976/24/25/29.97/30
• 720p23.976/24/25/29.97/30 (SDI only)
• 720p50/59.94/60
• 576i50 (PAL)
• 480i59.94 (NTSC)

Video Codecs and Files

• Apple ProRes 4444, 330 Mb/s, 12-bit
• Apple ProRes 36, 100, 145, 220 Mb/s, 8 and 10-bit
• Avid DNxHD 36, 100, 145, 220 Mb/s, 8 and 10-bit
• QuickTime wrapper (.MOV), UDF file system

Up/Down/Cross Conversion

• 480i, 576i, 720p, 1080i, 1080p to any 480i, 576i, 720p, 1080i, 1080p
• Hardware based, 10-bit

Frame Rate Conversion

• 24, 25, 30, 50, 60 to 24, 25, 30, 50, 60, 23.976, 29.97, 59.94 to 23.976, 29.97, 59.94, automatic 3:2 pull-down removal in 23.976 and 24 frame modes, other pull-down cadences include 2:2:2:4, 2:3:3:2, 3:2:3:2:2, and 2:2
• Hardware based, 10-bit

Analog Audio

• 2 balanced, mic- or line-level inputs on XLR (48 V phantom switchable)
• 2 balanced, line-level outputs on 5-pin XLR
• Frequency Response: 10 Hz-20 kHz, +/- 0.5 dB re 1 kHz
• THD + Noise: 0.004% max (1 kHz, 22 Hz-22 kHz)
• Input and Output Topology: fully electronically balanced, line-level, RF, ESD, short, and overload protected; pin-2 hot, pin-3 cold
• Line Output Clipping Level: +18dBu
• Output Attenuation: 0-20 dB, 1 dB increments
• Headphone, 1/8" with gain control

Digital Audio

• Sampling Rate / Bit Depth: 48 kHz, 24-bit
• AES/EBU: 4 channels in via XLR, 110 ohm, 2 V p-p
• Accepts 32k, 44.1k, 48k, 96k, 192k sample rates with SRC at input
• HDMI: 2 channels embedded HDMI input, 8 channels embedded HDMI output
• Accepts 32k, 44.1k, 48k, 96k, 192k sample rates
• SDI: 8 channels embedded SDI input, 8 channels embedded SDI output, 48k sample rate

File Storage

• The following can be used as storage media:
• Sound Devices approved 2.5-inch drive:
• "PIX-CADDY 2" mounted drive
• eSATAp-connected drive
• Sound Devices approved CompactFlash card
• (* eSATAp supplies 5 V @ 2A)

Timecode

• Modes supported: Freerun, Record run, External
• Frame rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND
• Accuracy: +/- 0.2ppm, holds accurate time code for 2 hours after power is removed
• Inputs / Outputs: BNC (LTC input and output), SDI or HDMI (Sony protocol), LEMO 5-pin